Application Area

In the isolation of all kinds of surfaces against water and chemicals, on concrete, wood, eternit, stone, all kinds of metal surfaces, on the floor coverings of factories and workshops, on concrete surfaces, before the floor coverings where resistance against acid, alkali and other corrosive chemicals are required, it should be applied well with the materials to be coated. It is used as a floor and corrosion protector.

Application Method

Concrete surfaces to be applied must be sound, dry and clean. If there is oil on the surface; It should be cleaned with chemical cleaning materials, if there is a large amount of absorbed oil, it should be cleaned by burning. However, the areas where the oil penetrates deep should be broken and repaired. If the surface area is large and a continuous application will be made, the floor should be jointed at regular intervals and the surface roughness should be removed with a slim machine. and II. Components are mixed with each other by paying attention to the mixing ratio and applied to the cleaned concrete surface with a hard brush or roller. Two coats should be applied on very porous surfaces. Mixing ratio: 1st Component 4 units / 2nd Component 1 unit by weight.

Danger and Safety Warnings

Storage

It can be stored for two years in its original packaging in 5-35 °C environments without direct sunlight. It should be protected from extreme temperature, humidity and frost.